Quick Fit Solderless 1 End Wire Cable For DC LED Strip Lights
A solderless Single-end wire connector for DC low voltage LED strips. Allows you to connect one end of an LED strip directly to a power cable without soldering, saving time and effort during installation.
How to Use:
- Turn off the power: Always disconnect the power supply first.
- Cut the LED strip: Cut only on the marked cut line.
- Open the connector: Lift the small plastic clip.
- Insert the LED strip: Slide the strip into the connector, ensuring the copper pads sit under the metal pins.
- Close the clip firmly: Press down until it clicks shut, securing the strip.
- Test the connection: Turn the power back on and check the strip lights up evenly.
Notes:
- Supplied as a pack of 5 connectors.
- Double-check polarity (+ / –) before closing the connector to ensure correct operation.
- For DC low voltage LED strips only. Not suitable for mains or high voltage strip lights.
| Product | Cable length (cm) | L (mm) | W (mm) | H (mm) |
| COB 5MM 2PIN 1END | 15 | 17.5 | 6.7 | 4.5 |
| COB 8MM 2PIN 1END | 15 | 17.5 | 10 | 4.5 |
| COB 10MM 2PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| COB 10MM 3PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| COB 10MM 4PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| COB 12MM 3PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| COB 12MM 5PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| COB 12MM 6PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| Product | Cable length (cm) | L (mm) | W (mm) | H (mm) |
| SMD 8MM 2PIN 1END | 15 | 17.5 | 10 | 4.5 |
| SMD 10MM 2PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| SMD 10MM 3PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| SMD 10MM 4PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| SMD 12MM 4PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| SMD 12MM 5PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| SMD 12MM 6PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Quick Fit Solderless 1 End Wire Cable For DC LED Strip Lights
Quick Fit Solderless 1 End Wire Cable For DC LED Strip Lights
A solderless Single-end wire connector for DC low voltage LED strips. Allows you to connect one end of an LED strip directly to a power cable without soldering, saving time and effort during installation.
How to Use:
- Turn off the power: Always disconnect the power supply first.
- Cut the LED strip: Cut only on the marked cut line.
- Open the connector: Lift the small plastic clip.
- Insert the LED strip: Slide the strip into the connector, ensuring the copper pads sit under the metal pins.
- Close the clip firmly: Press down until it clicks shut, securing the strip.
- Test the connection: Turn the power back on and check the strip lights up evenly.
Notes:
- Supplied as a pack of 5 connectors.
- Double-check polarity (+ / –) before closing the connector to ensure correct operation.
- For DC low voltage LED strips only. Not suitable for mains or high voltage strip lights.
| Product | Cable length (cm) | L (mm) | W (mm) | H (mm) |
| COB 5MM 2PIN 1END | 15 | 17.5 | 6.7 | 4.5 |
| COB 8MM 2PIN 1END | 15 | 17.5 | 10 | 4.5 |
| COB 10MM 2PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| COB 10MM 3PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| COB 10MM 4PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| COB 12MM 3PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| COB 12MM 5PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| COB 12MM 6PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| Product | Cable length (cm) | L (mm) | W (mm) | H (mm) |
| SMD 8MM 2PIN 1END | 15 | 17.5 | 10 | 4.5 |
| SMD 10MM 2PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| SMD 10MM 3PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| SMD 10MM 4PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| SMD 12MM 4PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| SMD 12MM 5PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| SMD 12MM 6PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
Select Compatible LED Strip Type
Select Compatible LED Strip Width
Select Compatible LED Strip Colour
From $2.17
Original: $6.19
-65%Quick Fit Solderless 1 End Wire Cable For DC LED Strip Lights—
$6.19
$2.17Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A solderless Single-end wire connector for DC low voltage LED strips. Allows you to connect one end of an LED strip directly to a power cable without soldering, saving time and effort during installation.
How to Use:
- Turn off the power: Always disconnect the power supply first.
- Cut the LED strip: Cut only on the marked cut line.
- Open the connector: Lift the small plastic clip.
- Insert the LED strip: Slide the strip into the connector, ensuring the copper pads sit under the metal pins.
- Close the clip firmly: Press down until it clicks shut, securing the strip.
- Test the connection: Turn the power back on and check the strip lights up evenly.
Notes:
- Supplied as a pack of 5 connectors.
- Double-check polarity (+ / –) before closing the connector to ensure correct operation.
- For DC low voltage LED strips only. Not suitable for mains or high voltage strip lights.
| Product | Cable length (cm) | L (mm) | W (mm) | H (mm) |
| COB 5MM 2PIN 1END | 15 | 17.5 | 6.7 | 4.5 |
| COB 8MM 2PIN 1END | 15 | 17.5 | 10 | 4.5 |
| COB 10MM 2PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| COB 10MM 3PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| COB 10MM 4PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| COB 12MM 3PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| COB 12MM 5PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| COB 12MM 6PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| Product | Cable length (cm) | L (mm) | W (mm) | H (mm) |
| SMD 8MM 2PIN 1END | 15 | 17.5 | 10 | 4.5 |
| SMD 10MM 2PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| SMD 10MM 3PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| SMD 10MM 4PIN 1END | 15 | 17.5 | 11.7 | 4.5 |
| SMD 12MM 4PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| SMD 12MM 5PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
| SMD 12MM 6PIN 1END | 15 | 16.6 | 13.8 | 4.5 |
